Replace RS232 cables with this Bluetooth Wireless link
Industry standard Bluetooth
Match pair for simple link
Single unit for use with PDA, PC etc
Battery option
Up to 100 metres communication
BT232 Bluetooth Wireless Cordless to RS232 Serial Port Cable Replacement Adapter
The BT232 Bluetooth Serial RS232 Converter allows you to replace serial communication cables. Bluetooth is an industry standard wireless communications protocol that provides short range, up to 100 metres, communications without wires.
The BT232 supports Bluetooth Wireless Cordless communication between controllers/devices that have a RS232 serial port interface. The BT232 Bluetooth Wireless Cordless to RS232 Serial Port Converter Adapter communicates up to 100 metres/300 feet with up to 115.2Kps speed.
The BT232 Bluetooth Wireless Cordless to Serial RS232 Serial Port Converter Adapter eliminates cables.
The BT232 Bluetooth Wireless Cordless to Serial RS232 can be used either singly or in pairs.
 |
Single BT232 will communicate with any Bluetooth Wireless Cordless enabled equipment (PC, PDA, etc.) that supports SPP (Serial Port Protocol). |
|
Supplied as a matching pair of Serial RS232 to Bluetooth Wireless Cordless Converter Adapters they can be used with any Serial RS232 equipment to eliminate the cable. There is no need to install additional programs in your computer or communication devices to use the BT232 Bluetooth Wireless Cordless to RS232 Serial Port Converter Adapter. Connect the BT232 Bluetooth Wireless Cordless to RS232 Serial Port Converter Adaptor to a serial port at your computer or communication device and supply it with power. A Bluetooth Wireless Cordless connection between two devices is automatically established when both BT232s are powered on. Then you can easily access it as if you were using the existing serial port. More than one pair can be used in the same area. |
Included in the package is a mains power adapter and a USB power lead. For portable applications the BT232 Bluetooth Wireless Cordless to RS232 Serial Port Converter Adapter can be powered from a battery.
The BT232 Bluetooth Wireless Cordless to RS232 Serial Port Converter Adaptor can be powered by the following methods: DC Power supply, PC USB Port through USB cable, Pin 9 of DB9 connector (only if special serial port used) or external battery.
Using a program like HyperTerminal, the BT232 Serial RS232 to Bluetooth Wireless Cordless Converter Adapter can easily be set up. It has an "Active/Setup" switch. You can set:
|
Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600 &11520 |
|
Flow control: None or Hardware |
|
Parity: None, Odd or Even |
|
Stop bit: 1 or 2 |
|
Mode: 1:1 (for use as a pair), Waiting Mode (with a another Bluetooth Wireless Cordless SPP device) and Register & Connect |
|
COM Port number: 1 to 7 (only for automatic connection after the registration is completed) |
|
Address: Select the destination BT232 |
|
Name: Enter up to 11 alphanumeric characters |
|
PIN: Password up to 11 alphanumeric characters |
|
2 year warranty |
To order:
| BT232 Single Serial RS232
to Bluetooth Wireless Cordless Converter Adaptor |
| BT232P Matching Pair of
Serial RS232 to Bluetooth Wireless Cordless Converters Adaptors |
[an error occurred while processing this directive]
Accessories:
|
BTBATT Battery Box for
PP3 9V battery with ON/OFF switch |
|
NULLMOD Converts BT232
from female DCE to male DTE |
| NULLMOD25 Converts
BT232 from female DCE to male 25 pin DTE
|
| USB-BT Add Bluetooth to
your PC. 100 metre range |
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
| |||||||||||||||
|
|
Many Thanks,
